Weldex WDD-7100C 1/3” COLOR DC-12 VOLT INDOOR MINI-ARMORDOME

Home > Dome Security Cameras >

Weldex WDD-7100C 1/3” COLOR DC-12 VOLT INDOOR MINI-ARMORDOME - PANASONIC CHIP

List Price: $138.00
Our Price: $92.00
You Save $46.00!

Manufacturer: Weldex

Product Code: KCN5-WDD-7100C

Description

The Color Armordome camera with digital signal processing shall be a Weldex WDD-7500C. The camera shall feature a 1/3" interline transfer Sony CCD pickup device. The camera shall produce a horizontal resolution of 420 lines and a signal-to-noise ratio of 45dB or greater. The camera's Digital Signal Processing (DSP) shall minimize aliasing and feature digital back light compensation (BLC). The camera's Automatic Gain Control (AGC) shall provide clear images in low light conditions. The camera shall display useable color pictures at a scene illumination of 0.3 lux (f/1.2). The camera synchronization shall be internal with line-lock (phase adjustable). The video signal shall be transmitted up to 800' over coaxial cable (RG-6). The camera shall have a BNC video output connector. The camera shall include internal, manually adjustable gimbals that will provide movement of the CCD circuit board and lens. The internal gimbals shall have pan & tilt movement that will allow for correct orientation of the CCD image while mounted on a surface. The camera shall include a fixed D-mount lens of choice - 2.5, 2.9, 3.6, 4.3, 6.0, 8.0, 12.0, and 16.0mm. The camera will feature an Electronic Light Control (ELC) (equivalent to continuous variable shutter speed between 1/60 sec. and 1/100,000 sec.). The power source shall be regulated 12VDC, 60Hz (200mA). The camera shall have a barrel plug for power input. The camera shall be enclosed in an all-steel housing base with lexan (polycarbonate) dome cover. The dome cover shall be 1/8" thick and withstand repeated impacts from an 8lb sledge hammer. The dome cover shall be clear slotted to provide uninhibited viewing of the image. The dome cover shall be held in place on the metal base with tamper-proof fasteners. The assembled dome housing shall provide limited protection for the camera and lens from dust and water. The dome housing shall be intended for interior use and have a rating of NEMA Type 2. The camera's dimensions shall not exceed 3.5" Diameter x 2.5" Height.