Weldex WDD-4905C 1/3” COLOR AC-24 VOLT INDOOR ARMORDOME / 570 LINES / 0.3 LUX

Home > Dome Security Cameras >

List Price: $378.00
Our Price: $252.00
You Save $126.00!

Manufacturer: Weldex

Product Code: KCN5-WDD-4905C

Description

The High Resolution Color Armordome camera with digital signal processing shall be a Weldex WDD-4905C. The camera shall feature a 1/3" interline transfer Sony CCD pickup device. The camera shall produce a horizontal resolution of 570 lines and a signal-to-noise ratio of 45dB or greater. The camera's Digital Signal Processing (DSP) shall minimize aliasing and feature digital back light compensation that is selectable on and off (BLC). The camera's Automatic Gain Control (AGC) shall provide clear images in low light conditions. The camera shall display useable color pictures at a scene illumination of 0.3 lux (f/1.2). The camera synchronization shall be internal with line-lock (phase adjustable). The video signal shall be transmitted up to 800' over coaxial cable (RG-6). The camera shall have a BNC video output connector. The camera shall include internal, manually adjustable gimbals that will provide movement of the CCD circuit board and lens. The internal gimbals shall have movement on the X,Y,Z axis points (Pan / Tilt / Rotation) that will allow for correct orientation of the CCD image while mounted on a surface. The camera shall include a variable focal D-mount lens of 4mm - 9mm with an option of a 2.6mm - 6mm variable focal D-mount lens. The variable focal lens shall further have be an ALC servo lens (automatic iris lens) that is DC driven. The camera will additionally feature an Electronic Light Control (ELC) (equivalent to continuous variable shutter speed between 1/60 sec. and 1/100,000 sec.) which is selectable on and off. The power source shall be 24VAC, 60Hz (40VA / 1.66Amp). The camera shall have a lead-wire for power input. The camera shall be enclosed in an all steel housing base with lexan (polycarbonate) dome cover. The dome cover shall be 1/8" thick and withstand repeated impacts from an 8lb sledge hammer. The dome cover shall be smoked to reduce the amount of light and reflection on the interior of the dome housing (-1 f-stop). The dome cover shall be held in place on the metal base with tamper-proof fasteners. The assembled dome housing shall provide limited protection for the camera and lens from dust and water. The dome housing shall be intended for interior use and have a rating of NEMA Type 2. The camera's dimensions shall not exceed 4.7" Diameter x 3.5" Height.