|
Remote DVR Configuration: Full control of local DVR settings The Remote DVR facilitates the administrator to remotely configure local GV-System’s specific settings from one single workstation. When the Remote DVR is on the run, the local GV-System loses its full control of the DVR operations and the Control Center takes full control of the configuration.
Remote Desktop: Remote access to local DVR desktop When the Remote Desktop is on the run, the Control Center will receive the same desktop view of local DVR. In the meantime, the security administrator can remotely control the local GV-System's full operations and even configure Windows operation system of the networked GV-System at low bandwidth.
Digital Matrix View: Remotely monitor, record and playback from 256 cameras The Matrix View is a single display where videos from a group of maximum 64 cameras will be displayed, e.g. groups of office area cameras, exit cameras, or street cameras. The GV-Control Center supports up to 4 Matrix View displays with 256 cameras on four monitors at a time. Depending on various surveillance needs, the center operator can open 4 Matrix View displays simultaneously to view more videos from different DVRs. Each Matrix View supports live monitoring, recording and video playback.
Remote ViewLog: Playback of recorded videos from local GV-Systems The Remote ViewLog function enables playback of all video archives from different GV-Systems. The security administrator can utilize this Remote ViewLog to save video clips for future event retrieval or for video evidence.
I/O Central Panel: Group, manage and remotely configure I/O devices The Control Center provides a useful I/O Central Panel for the security administrator to remotely manage all I/O devices connected with GV-Systems. Administrators can group function-related I/O devices together for ease of control, e.g. groups of IR sensors, alarms, or fire exits. In case of building fire, for example, the Control Center can trigger all alarms on the networked GV-Systems and force opening all the fire exits or water spray systems at the same time.
|
Minimum requirements for GV-Control Center |
|
OS |
Windows 2000, Windows XP, Server 2003 |
|
CPU |
Pentium 4, 2.6 GHz, 800MHz FSB |
|
RAM |
2 x 512 MB dual DDR400 SDRAM |
|
Hard Disk |
80GB |
|
VGA |
NVIDIA GeForce4 MX440 64MB, 1024 x 768 resolution |
|
Network |
TCP/IP | |
